Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,011)
| Discussions | Replies | Latest Activity |
|---|---|---|
Sawing Side RibsReady to build my first set of ribs... sawing a 1x4 down from 3.5" on one end to 1.5" on the other end sounds real simple, until you do it.… Started by Riverman in General Forum |
12 |
Jul 10, 2016 Reply by dreu patterson |
Anchor pulleySo this 30lb anchor is pretty tough to pull with just the Dierks setup. A guy suggested adding a pulley to the anchor and running the rope… Started by Mike Thomas in General Forum |
3 |
Jul 8, 2016 Reply by Mike Thomas |
Southeastern Fir Supplier?Been calling around for the past few weeks trying to get my hands on some CVG fir in Atlanta. I was pointed to Randall Brothers and they t… Started by Bennett Yarbrough in General Forum |
9 |
Jul 8, 2016 Reply by Bennett Yarbrough |
Rapid RobertFinally decided on building a 14' Rapid Robert. I sure like the beauty of a 16' double ender, but there is no question in my mind the Rapi… Started by Greg Hall in General Forum |
12 |
Jul 6, 2016 Reply by dreu patterson |
Rear Casting Brace - Gunnel to GunnelHi All, Long time lurker, fist time poster. I recently picked up a 20 year old 16ft Greg Tatman wooden drift boat. Took it down the Lower… Started by Charlie Benton in General Forum |
17 |
Jul 6, 2016 Reply by Mark A. York |
Keith SteeleHello, I saw an article about Keith Steele's son Keith is building driftboats from his dad's plans and leftover parts. Does anyone know h… Started by Christopher Hickey in General Forum |
3 |
Jul 5, 2016 Reply by Rick Newman |
Happy 4th of July!Was wondering if any of you took your boats out this weekend? If so could you post a few pictures? Started by JAY STRUGNELL in General Forum |
4 |
Jul 5, 2016 Reply by Ronald R Rupert |
Davis Lake trip. Drift boat rentals?Hello everyone, I hope you all are having a fine holiday weekend. I'll be leaving for my third annual fly fishing trip on Davis Lake, Ore… Started by Christopher Avila in General Forum |
0 | Jul 3, 2016 |
passenger load questionMy build is a 16' rapid robert with a flat back.Is 4 people total too many? 2 in front,one oarsman and one in back.Thanks to all who respond Started by dreu patterson in General Forum |
7 |
Jul 1, 2016 Reply by Phillip Westendorf |
Rub RailsI didnt have any plywood left from my sides, but kinda want mahogany so it stands out from the Okume sides. My choices are: 1) buy a 8ft- 1… Started by Mike Thomas in General Forum |
5 |
Jun 30, 2016 Reply by Mike Thomas |
© 2024 Created by Randy Dersham.
Powered by
