Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,011)
| Discussions | Replies | Latest Activity |
|---|---|---|
Technique question on applying 5oz plain weave Kevlar to bottom of boat.Hi, I've purchased 5 oz plain weave Kevlar to put on the bottom of the boat I'm building. I've enough for 2 layers. Since it is plain w… Started by Jeff Levin in General Forum |
4 |
Oct 10, 2013 Reply by lhedrick |
Where is everyone?Is everyone out fishing in there finished wood boats, and if so could we get some pictures of those trips? I have not been able to get out… Started by JAY STRUGNELL in General Forum |
19 |
Oct 9, 2013 Reply by stephen ludwig |
Upper Delaware First BuildHi gang- Brand spanking new-bie here seriously considering an over winter first build in upstate New York. I'm still researching which plan… Started by Eamon Lee in General Forum |
4 |
Oct 9, 2013 Reply by stephen ludwig |
Storing a wood boatI am looking at an older wood drift boat (approximately50 years old). It is in good but not "show" condition. I would use it on fairly… Started by Robert Miller in General Forum |
3 |
Oct 8, 2013 Reply by tungsten |
HatchesStarting to think about hatch lids, combing, and hinges for my dory. The hatch landings will have a gutter system which evactuates straight… Started by chris towles in General Forum |
2 |
Oct 6, 2013 Reply by Don Hanson |
A few questions about wood vs. foamI am in the process of building a modified Briggs dory from Roger Fletcher's book. It will be about 15'9" at the centerline and a double-en… Started by River Gypsy in General Forum |
19 |
Oct 3, 2013 Reply by lhedrick |
Clamps?I went to the store today to look at clamps. They had C clamps, and all sorts of modern clamps. Light duty, medium duty, heavy duty, and… Started by Christopher Bruttig in General Forum |
10 |
Sep 25, 2013 Reply by twoblacklabs |
Who is driving this dory?Hi All, Just posted an album of rare images taken from an 8-mm film of a 1967 Grand Canyon self guided river trip. The trip had two rafts a… Started by Tom Martin in General Forum |
5 |
Sep 22, 2013 Reply by JAY STRUGNELL |
Trimming the hull to shapeAnyone have any good techniques for trimming the bottom to fit while keeping the side angle. Anyone ever build a jig to use a router? I hav… Started by chris towles in General Forum |
5 |
Sep 21, 2013 Reply by chris towles |
installing outer chinehello again. I'm getting closer on my project but ran into a snag when the outer chine (oak) snapped during the install. I had the chines… Started by Jeff Gent in General Forum |
8 |
Sep 13, 2013 Reply by Jeff Gent |
© 2024 Created by Randy Dersham.
Powered by
