Roger Fletcher's Discussions (144)

Search Forum

View

Discussions Replied To (122) Replies Latest Activity

"Dave Z, regarding the shortened side frames under the fly line deck – that is tradit…"

Roger Fletcher replied Sep 29, 2009 to 14' Double Ender

 17 Oct 8, 2009
Reply by Dave Z

"That's a great story, Dave. My fishing buddy, Ken, and I drove over to the Nestucca…"

Roger Fletcher replied Jul 5, 2009 to Ever happen to you?

 2 Jul 6, 2009
Reply by Rick Finnell

"Well, and then there is the Brad Dimock way -- http://riverstouch.com/DimockAndDierk…"

Roger Fletcher replied Jun 6, 2009 to rough cost of drift boat

 5 Jun 6, 2009
Reply by Dave Z

"OR, you can take a 16-footer, lop off both ends, use the same frames placements, and…"

Roger Fletcher replied May 5, 2009 to Shortening a Transomed Double Ender

 5 May 5, 2009
Reply by Roger Fletcher

"Yes, you can reduce your plans by using a common factor. It's unlikey that the bevel…"

Roger Fletcher replied May 4, 2009 to Shortening a Transomed Double Ender

 5 May 5, 2009
Reply by Roger Fletcher

"If you are tying to replicate the GEM to a whisker, then W oak strips would be the w…"

Roger Fletcher replied May 1, 2009 to What to do with the bottom of this boat?

 4 May 1, 2009
Reply by Tom Martin

"It will be hard to find water as docile as Class !!. The Deschutes from Warm Springs…"

Roger Fletcher replied Apr 7, 2009 to Drift boat camping trip

 2 Apr 7, 2009
Reply by Bryan McDade

"Jb - You're assumption is correct about the motor size. Bob Pritchett always used an…"

Roger Fletcher replied Mar 30, 2009 to Bob Pritchett's dory

 3 Mar 30, 2009
Reply by jb

"Dave Z has it right at about 15 degrees for the McKenzie double ender with transiom…"

Roger Fletcher replied Mar 24, 2009 to Traditional seat back

 5 Mar 24, 2009
Reply by jb

"Many Colorado River dories sport 10-foot oars. The added length provides added lever…"

Roger Fletcher replied Mar 19, 2009 to oar lenth?

 6 Mar 19, 2009
Reply by Mike Dearing

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service