Randy Dersham's Discussions (571)

Search Forum

View

Discussions Replied To (537) Replies Latest Activity

"If you are going to oil the inside then you are not encapsulating so a fillet isn't…"

Randy Dersham replied Mar 7, 2011 to Screw Distance

 26 Mar 19, 2011
Reply by chris towles

"Using 5200 as a fillet can work.    If the wood is raw the 5200 will work into the g…"

Randy Dersham replied Mar 6, 2011 to Screw Distance

 26 Mar 19, 2011
Reply by chris towles

"This is a common thread that mixes two different characteristics of SS screws and co…"

Randy Dersham replied Mar 2, 2011 to Screws through Fiberglass

 17 Mar 3, 2011
Reply by lhedrick

"Jordan, this is great advice.  Also remember to allow the epoxy and glass to be comp…"

Randy Dersham replied Mar 1, 2011 to Screws through Fiberglass

 17 Mar 3, 2011
Reply by lhedrick

"UHMW is the shoe and you should use 1/4 inch. There are some very thin UHMW products…"

Randy Dersham replied Mar 1, 2011 to UHMW Shoe Thickness

 1 Mar 1, 2011
Reply by Randy Dersham

"All of the epoxys are stronger than the wood grain. If the joint fails it will fail…"

Randy Dersham replied Feb 18, 2011 to Putting frames together?

 10 Feb 18, 2011
Reply by Don Messick

"This new poster for 2011 is going to press on Tuesday.   "

Randy Dersham replied Feb 18, 2011 to McKenzie River Wooden Boat Festival is April 23rd this year

 14 Apr 5, 2011
Reply by Roger Goth

"good stuff Sandy, When I said short cure time I was referring to the five minute and…"

Randy Dersham replied Feb 18, 2011 to Putting frames together?

 10 Feb 18, 2011
Reply by Don Messick

"Lawrence has is right. Almost any epoxy will do . I forgot to mention that you shoul…"

Randy Dersham replied Feb 17, 2011 to Putting frames together?

 10 Feb 18, 2011
Reply by Don Messick

"Epoxy as glue, then good stainless steel screws.  Counter sink them and then plug or…"

Randy Dersham replied Feb 17, 2011 to Putting frames together?

 10 Feb 18, 2011
Reply by Don Messick

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service