Mike Baker's Discussions (385)

Search Forum

View

Discussions Replied To (369) Replies Latest Activity

"Hey Jack, Here is what Kevin C. had to say;1/8"x 3/4" steel strips screwed into whit…"

Mike Baker replied Mar 24, 2012 to Stainless Rub Rail?

 10 Mar 24, 2012
Reply by Jack Rose

"I have been using 1/8"x3/4"x12' Aluminum ala Keith/Steve Steele. But I am intrigued…"

Mike Baker replied Mar 24, 2012 to Stainless Rub Rail?

 10 Mar 24, 2012
Reply by Jack Rose

"Hey Nick, The African Mahogany will work very well for the gunnels and inside chine…"

Mike Baker replied Mar 23, 2012 to Wood.....again

 6 Mar 28, 2012
Reply by Andrew

"Hey Jack, I tried the stainless bar stock once (from online metals). I bought enough…"

Mike Baker replied Mar 23, 2012 to Stainless Rub Rail?

 10 Mar 24, 2012
Reply by Jack Rose

"Hey Guy, I have enjoyed watching what has to be the longest thread in WBP history. C…"

Mike Baker replied Mar 23, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Hey Dave, Notching the frames is how I build too, but it does get a bit tricky at th…"

Mike Baker replied Feb 6, 2012 to Frame Angles & Bevels

 10 Feb 7, 2012
Reply by Dave P

"Hey Dave, The bottom width is not critical. I taper mine pretty much as wide as the…"

Mike Baker replied Feb 6, 2012 to Frame Angles & Bevels

 10 Feb 7, 2012
Reply by Dave P

"Hey Bob, I have seen two older wood boats that had Formica skid shoes and both of th…"

Mike Baker replied Dec 24, 2011 to Formica skid shoe

 1 Dec 24, 2011
Reply by Mike Baker

"Hey Roger, I have not built one of these. Do not cut the chine log square it will en…"

Mike Baker replied Nov 14, 2011 to Spira International Mackinaw Drift boat

 4 Nov 15, 2011
Reply by Roger Buchanan

"Welcome Tyler, I suspect as a cabinet maker you will have a very hard time not tryin…"

Mike Baker replied Oct 30, 2011 to Custom Cabinetmaker wants to built a Custom Drift Boat..

 9 Oct 30, 2011
Reply by Don Hanson

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service