Randy Dersham's Discussions (571)

Discussions Replied To (537) Replies Latest Activity

"1/2" is perfect. We ship 1/2" Port Orford Cedar for floor board in our kits. Any fl…"

Randy Dersham replied Nov 15, 2010 to Floor Boards

16 Nov 18, 2010
Reply by Mike Baker

"I wish that I could get Australian Hoop pine in BS1088 in the US. I don't believe th…"

Randy Dersham replied Nov 13, 2010 to Timber substitutes for an Australian build

2 Nov 19, 2010
Reply by Scott Pattison

"You don't need to steam. It will bend; although this is just a little violent. The r…"

Randy Dersham replied Nov 12, 2010 to Double ender with transom--Working out the transom with 15' 9" side panels

12 Nov 12, 2010
Reply by Roger Fletcher

"What a great looking job! I lived aboard for about four years and really miss it no…"

Randy Dersham replied Nov 11, 2010 to Cygnus overhaul 2010

2 Nov 11, 2010
Reply by Randy Dersham

"1. the older boat plans have a point on the stem. Once the sides are attached you ca…"

Randy Dersham replied Nov 11, 2010 to Boat Building Questions

4 Nov 14, 2010
Reply by Riverman

"http://barkleysoundoar.com/Product.htm#products is the link to the Barkley Sound Com…"

Randy Dersham replied Nov 10, 2010 to Spruce Oars

20 Apr 29, 2011
Reply by Bill Neal

"Use a router and a straight edge to cut a 1/8 inch deep scarf in the plywood as it i…"

Randy Dersham replied Nov 4, 2010 to Replacing Sides Near Chine......? Help Needed!

5 Nov 4, 2010
Reply by Randy Dersham

"Hello Josh, A member, Brian, did this same repair to the bottom and lower sides of a…"

Randy Dersham replied Nov 3, 2010 to Replacing Sides Near Chine......? Help Needed!

5 Nov 4, 2010
Reply by Randy Dersham

"Greg if you are posting the video on Youtube.com then I don't care. Then YouTube can…"

Randy Dersham replied Nov 1, 2010 to Roughed up by the Rogue

14 Nov 13, 2010
Reply by Greg Hatten

"That's good advice from Lawrence. Post photos often and ask questions. Everyone here…"

Randy Dersham replied Oct 29, 2010 to I'm so thankful...

4 Oct 29, 2010
Reply by Riverman

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service