Jason Knight's Discussions (472)

Search Forum

View

Discussions Replied To (410) Replies Latest Activity

"HAHA - yes you are forgiven! no worries... I will wait on the hole, I can't bear it…"

Jason Knight replied Jul 1, 2009 to Drain Plugs

 14 Jul 3, 2009
Reply by mitchell

"Oh and if you want a rich black color for the bottom - you will need to add graphite…"

Jason Knight replied Jul 1, 2009 to Fiberglass bottom install

 4 Jul 2, 2009
Reply by Jason Knight

"Here is how I did mine. Based on the instruction from the Tatman fellows. Basically…"

Jason Knight replied Jul 1, 2009 to Fiberglass bottom install

 4 Jul 2, 2009
Reply by Jason Knight

"I'm waiting! I can't do it! hahah drilling through that floor and then through the g…"

Jason Knight replied Jul 1, 2009 to Drain Plugs

 14 Jul 3, 2009
Reply by mitchell

"Man I just can't bring myself to drill a hole in the bottom of my boat... I have tri…"

Jason Knight replied Jul 1, 2009 to Drain Plugs

 14 Jul 3, 2009
Reply by mitchell

"2:1 mixing ratio is money. You can easily make small batches if you need to... the p…"

Jason Knight replied Jun 29, 2009 to Best Epoxy, System 3 vs West Marine?

 6 Jun 29, 2009
Reply by Jason Knight

"Yes there is a wood plug glued into the end of the pipe and then the 1/4 thread in t…"

Jason Knight replied Jun 28, 2009 to Attachment from pipe for seat to the rib.

 7 Jun 28, 2009
Reply by Jason Knight

"Here is a pic of the method Randy described (this is from my boat.) The only thing I…"

Jason Knight replied Jun 26, 2009 to Attachment from pipe for seat to the rib.

 7 Jun 28, 2009
Reply by Jason Knight

"I am sure you have already visited this forum - but here it is again... This forum h…"

Jason Knight replied Jun 22, 2009 to Anyone build a freestone classic from Montana Boat Buiders?

 1 Jun 22, 2009
Reply by Jason Knight

"Yea I suppose if they are loaded that heavily it's not a factor... it will never be…"

Jason Knight replied Jun 18, 2009 to Kevlar

 13 Jun 20, 2009
Reply by Randy Dersham

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service