Mike Baker's Discussions (385)

Search Forum

View

Discussions Replied To (369) Replies Latest Activity

"Hey Brent, I have used; Duratough-Hated it way too thin for me. Helmsman spar uretha…"

Mike Baker replied Jan 13, 2010 to Varnish Selection

 17 Jan 17, 2010
Reply by Brent Ross

"On the flip side while I agree once you build a boat you will be ready for a lot mor…"

Mike Baker replied Nov 5, 2009 to What you get when you build a boat...

 10 Nov 21, 2009
Reply by John Almberg

"Hey Dave, How about a flat bottom Skiff type boat. It seems you could build the fron…"

Mike Baker replied Oct 29, 2009 to Jonesin' for a new project.....

 3 Oct 29, 2009
Reply by Mike Baker

"I have never done the rounded chine routine. I used to do screws every two inches no…"

Mike Baker replied Oct 14, 2009 to Screw pattern- for epoxy bottom with rounded/taped edges

 4 Oct 14, 2009
Reply by Randy Dersham

"Damn! That is one quick little boat! Looks like you guys had a blast. You just can't…"

Mike Baker replied Oct 14, 2009 to tubby on the rouge

 9 Oct 14, 2009
Reply by Mike Baker

"Hey Anthony, I usually use 3M-5200 for sealing the bottom. It doesn't come in clear…"

Mike Baker replied Oct 1, 2009 to newbe sourcing marine grade polyurathane sealant adhesive.

 1 Oct 1, 2009
Reply by Mike Baker

"Just think, if you wanted to build a 24 footer you wouldn't have to do any more scar…"

Mike Baker replied Sep 24, 2009 to Finally finished the 18 ft Don Hill

 14 Oct 1, 2009
Reply by E. Landis

"Great find Cody! Is the Hull painted or natural? Some of the old boats were also oil…"

Mike Baker replied Sep 24, 2009 to 14' Double Ender

 17 Oct 8, 2009
Reply by Dave Z

"Hey Jason, I have lost two anchors using the spring loaded type clip (slow learner)…"

Mike Baker replied Aug 24, 2009 to Doh!

 9 Aug 30, 2009
Reply by Jesse Ronnow

"Ben, I would be very interested in that article. I have been wanting to stain a boat…"

Mike Baker replied Aug 12, 2009 to Questions about Staining

 3 Aug 16, 2009
Reply by Ben

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service