Randy Dersham's Discussions (571)

Search Forum

View

Discussions Replied To (537) Replies Latest Activity

"We use epoxy to install the rub strips. Two nails or screws on each frame. Some beli…"

Randy Dersham replied Mar 18, 2009 to Two questions

 1 Mar 18, 2009
Reply by Randy Dersham

"You are on Dave about the silicon bronze ring nails being sometimes tough to manage.…"

Randy Dersham replied Mar 18, 2009 to Ring nails vs screws II

 17 May 23, 2011
Reply by AJ DeRosa

"There are two versions of Dek's Olje, a #1 and #2. Deks #1 is the deep penetrating…"

Randy Dersham replied Mar 18, 2009 to Deeks

 11 Mar 20, 2009
Reply by Dave Z

"You will want to clean the area well and then use a color restorer like THIS ONE fro…"

Randy Dersham replied Mar 18, 2009 to Restoring life to dried out wood

 2 Mar 18, 2009
Reply by Brad

"The old boats are built almost entirely with screws and it has worked for years so i…"

Randy Dersham replied Mar 18, 2009 to Ring nails vs screws II

 17 May 23, 2011
Reply by AJ DeRosa

"That really is a fantastic look. One of the best I've seen. Great job."

Randy Dersham replied Mar 17, 2009 to Messing with Varnish

 11 Oct 11, 2010
Reply by Chris Anderson

"Dave, I'm down on varnish and up on polyurethane. If you want a darker look then use…"

Randy Dersham replied Mar 16, 2009 to Messing with Varnish

 11 Oct 11, 2010
Reply by Chris Anderson

"A single set of floor boards will be hard to remove. The tables I mentioned are two…"

Randy Dersham replied Mar 16, 2009 to Floor Boards

 24 Mar 18, 2009
Reply by Jesse Ronnow

"It is easy to put the floor boards in with a stringer on each end and perhaps one in…"

Randy Dersham replied Mar 16, 2009 to Floor Boards

 24 Mar 18, 2009
Reply by Jesse Ronnow

"Yup, Dave Z has it just right. almost every through-hull on the big salt water boats…"

Randy Dersham replied Mar 15, 2009 to Hole in the boat@!@!

 3 Mar 16, 2009
Reply by Brad

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service