Joseph Podesta's Discussions (61)

Search Forum

View

Discussions Replied To (42) Replies Latest Activity

"no i did not use vacuum bagging for the hull. i rolled on and sanded then rolled on…"

Joseph Podesta replied Jun 5, 2012 to All done!

 17 Jun 9, 2012
Reply by Randy Dersham

"Hello Kent R. You want to give Jason Cajune a ring. He is the designer of these boat…"

Joseph Podesta replied Jun 3, 2012 to All done!

 17 Jun 9, 2012
Reply by Randy Dersham

"the false stem wasnt too hard to do. you need to build a steamer, I did mine out of…"

Joseph Podesta replied May 29, 2012 to All done!

 17 Jun 9, 2012
Reply by Randy Dersham

"thanks everyone! i hope it motivates other builders, either to push through or start…"

Joseph Podesta replied May 29, 2012 to All done!

 17 Jun 9, 2012
Reply by Randy Dersham

"oh and i used a brush and a roller...goes on just like paint. i think finish would b…"

Joseph Podesta replied May 26, 2012 to Durabak Prep and Application

 12 Jun 27, 2012
Reply by Randy Dersham

"i did 80 grit and it worked just fine. You will need to clean the surface aftwards w…"

Joseph Podesta replied May 26, 2012 to Durabak Prep and Application

 12 Jun 27, 2012
Reply by Randy Dersham

"i posted pictures of my boat its basically a Montana boat builders freestone guide b…"

Joseph Podesta replied Oct 14, 2011 to Need a cover for my boat

 5 Oct 14, 2011
Reply by Joseph Podesta

"Tnks for the info...but i wish i knew how to sow...but fabric is not cheap for sure.…"

Joseph Podesta replied Oct 14, 2011 to Need a cover for my boat

 5 Oct 14, 2011
Reply by Joseph Podesta

"seriously...my back hurts everytime I work on my boat thats why I am so eager to fli…"

Joseph Podesta replied Jun 21, 2011 to best way to flip a boat with pulleys

 10 Jun 22, 2011
Reply by Rick Newman

"I cant MANUP I had 8 back surgeries this year...8 of them...pulleys will have to be…"

Joseph Podesta replied Jun 21, 2011 to best way to flip a boat with pulleys

 10 Jun 22, 2011
Reply by Rick Newman

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service