Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,019)
| Discussions | Replies | Latest Activity |
|---|---|---|
Rear seat casting brace8434781I am thinking about using my new found spare time to build a casting brace for a fisherperson seated in the rear of my wood frame DB. I see… Started by JC Smith in General Forum |
4 |
Apr 15, 2020 Reply by Shawn Baker |
Lower McKenzieAny one float Hendricks Wayside to Bellinger lately? Any trees etc. in that run? Started by David Jensen in General Forum |
0 | Apr 7, 2020 |
I am looking for a light wood to make oars.I have made several sets of oars using fir. Usually they are heavier than I would like. Once I used basswood which is marginally lighter. H… Started by Charles Schelin in General Forum |
42 |
Mar 26, 2020 Reply by JC Smith |
Rebedding chine cap and cant find 3M 101 sealantI have a 1982 Keith Steel 16 that I restored 4 years ago. It has developed a leak along the chine, so I pulled the chine cap off and am loo… Started by Kirk Miller in General Forum |
3 |
Mar 9, 2020 Reply by Rick Newman |
Urea formaldehyde for scarfing plywood?Hello, I am new to the group and was wondering if anyone has experience with gluing it the scarfed plywood with a urea formaldehyde produc… Started by Mark Krahn in General Forum |
1 |
Feb 8, 2020 Reply by David Witton |
Wooden Drift Boat Restoration/Presevation (New Member)Hello folks! New to this forum, but have been reading it for about 2 months! Excellent content!!!By way of introduction, I have had on my b… Started by Peter Honsberger in General Forum |
1 |
Jan 29, 2020 Reply by Rick Newman |
Salvage or restoration drift boat in Boise, IdahoThis boat is listed on Craig's list in Boise, Idaho. Appears to be a 16' Don Hill kit boat that wasn't quite finished. Started by Richard Sutherland in General Forum |
6 |
Jan 24, 2020 Reply by Richard Sutherland |
Greg and Randy: TV CelebritiesNice job you guys! https://www.youtube.com/watch?v=W19P_ncXC_Q Started by CWarmouth in General Forum |
1 |
Jan 14, 2020 Reply by mark hilbert |
Rescue SuggestionsThis boating upset occurred on the Upper Kern at about 400 cfs in my local area. I was simply an observer. As I looked at the pictures, I… Started by Ants Uiga in General Forum |
1 |
Jan 2, 2020 Reply by Shawn Baker |
I have a Ply/Epoxy boat but am curiousIn the Don Hill and McKenzie boats are the ribs glued in or glued and screwed? I don't see filled screw holes on most boat photos. This gav… Started by Don Tyson in General Forum |
20 |
Dec 26, 2019 Reply by Don Tyson |
© 2025 Created by Randy Dersham.
Powered by
