Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,016)
| Discussions | Replies | Latest Activity |
|---|---|---|
New builder question: Glassing inside/outside of boatFirst post, as I build my first boat: A Honky Dory (16' Mackenzie drift boat). Montana River Boats' plans call for 1/4" side panels and a… Started by Sean Larkin in General Forum |
7 |
Jul 22, 2016 Reply by Phillip Westendorf |
Great Thumb CloneI had an opportunity to drive a buddy down to the Corn Creek put in on the Main Salmon River last week. The group we were meeting was suppo… Started by Rick Newman in General Forum |
0 | Jul 17, 2016 |
Starting a Steele 16 drift boat restorationThis is my first project so I am looking for general guidance to start with. I have bee perusing other discussions and can see there are lo… Started by Kirk Miller in General Forum |
54 |
Jul 17, 2016 Reply by Kirk Miller |
Don Hill drift boat purchase???I am wanting to purchase a resto project or build new. I am considering buying a 14 foot Don Hill originally built from a kit. It has spent… Started by Nathan Frisby in General Forum |
14 |
Jul 14, 2016 Reply by Mark A. York |
first time out in a drift boat and floor questionwell,I finally completed my rapid robert and trailer with all the fixins and it only took me 10 months! It's nice to have my weeknights bac… Started by dreu patterson in General Forum |
7 |
Jul 12, 2016 Reply by Mike Thomas |
Sawing Side RibsReady to build my first set of ribs... sawing a 1x4 down from 3.5" on one end to 1.5" on the other end sounds real simple, until you do it.… Started by Riverman in General Forum |
12 |
Jul 10, 2016 Reply by dreu patterson |
Anchor pulleySo this 30lb anchor is pretty tough to pull with just the Dierks setup. A guy suggested adding a pulley to the anchor and running the rope… Started by Mike Thomas in General Forum |
3 |
Jul 8, 2016 Reply by Mike Thomas |
Southeastern Fir Supplier?Been calling around for the past few weeks trying to get my hands on some CVG fir in Atlanta. I was pointed to Randall Brothers and they t… Started by Bennett Yarbrough in General Forum |
9 |
Jul 8, 2016 Reply by Bennett Yarbrough |
Rapid RobertFinally decided on building a 14' Rapid Robert. I sure like the beauty of a 16' double ender, but there is no question in my mind the Rapi… Started by Greg Hall in General Forum |
12 |
Jul 6, 2016 Reply by dreu patterson |
Rear Casting Brace - Gunnel to GunnelHi All, Long time lurker, fist time poster. I recently picked up a 20 year old 16ft Greg Tatman wooden drift boat. Took it down the Lower… Started by Charlie Benton in General Forum |
17 |
Jul 6, 2016 Reply by Mark A. York |
© 2025 Created by Randy Dersham.
Powered by
