I will be changing the anchor system on the pram and installing a winch system. What would be the best way to plug the holes left when i remove the anchor arm and rope. Thanks, Rob

Views: 381

Attachments:

Reply to This

Replies to This Discussion

Hardwood dowels and epoxy, just not red oak. Just a snug enough fit that epoxy will have a small space to glue the dowel in. You don't want a entry point for water into the plywood.

Rick N

Thanks Rick, Do you mean something like 3M 5200?

No, just plain old epoxy. It will adhere the dowel to the plywood and seal the plywood. On woodenboatforum.com a boat restorer just epoxied in 2500+ bungs in his sailboat with epoxy.

Rick N

Robert,

Nice looking boat!

Wet the hole and the plug/dowel with mixed epoxy and then add something to thicken the epoxy to act as a gap filler.  Make sure you get a good coating and then wipe up the excess before it sets up.  You can use wood powder, talcum powder or one of the epoxy manfacturer's additives to thicken the epoxy.

You don't want to just use mixed epoxy, as it doesn't fill gaps well enough.

G'Luck,

Dorf

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service