Wooden Boat People
By McKenzieDriftBoat.com
Oar Handle Treatment?
Hello WBP,
I am wondering how to treat the handles on my ash oars... any ideas out there?
(The rest of the oar is varnished)
Views: 1209
Replies to This Discussion
-
Permalink Reply by Brad Dimock on
-
In my mind there's nothing worse than having someone grease up their hands, use your oars (or tiller handle), then turn it back to you. As Kelly says, it's like trying to control your boat holding onto a fish. I had to banish one of my motor swampers in Grand Canyon from driving without gloves, and she was forever slathering lotion on, and it made it impossible for me to drive afterward. I digress--what I meant to say was, BAG BALM ON OARS???? GOOD GOD.
-
Permalink Reply by Dave P on
-
Exactly! When it was my turn to row after he fell out of the boat, it was difficult to hang on tho them.
-
-
Here's a shot of the last (alas) of the original knucklehead grips (center) and some inferior reproductions on the outer two.
-
-
There is something undefinably cool about sitting in my 1972 Briggs dory, clutching those even-older Harley grips. Something about old classics, accentuated by the radical distance between an old wooden rowboat and an old roaring, throbbing monsterhog. It adds something to the feathering process. Heading down Grand Canyon Wednesday to do that very thing. Pictured: 1940 Knucklehead, with grips:
-
Permalink Reply by Steven Miller on
-
I use black shrink tubing. It can be lightly sanded to roughin it up a little and can be gleaned to a sticky state with a good dry rag or windex.
- ‹ Previous
- 1
- 2
- Next ›
© 2024 Created by Randy Dersham.
Powered by
