Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,020)
| Discussions | Replies | Latest Activity |
|---|---|---|
Stainless Rub Rail?Hey, this may not be kosher, but I'm moving my reply in the "UHMW Chine Cap?" discussion and starting a new thread. But Rick Newman found a… Started by Jack Rose in General Forum |
10 |
Mar 24, 2012 Reply by Jack Rose |
EPOXY vs POLY RESIN TEST RESULTSHello all - just finished a couple of tests last night and thought I would share the results.I used 2 pcs of 2' x 4' of 1/4" plywood.On 1 p… Started by Greg Jensen in General Forum |
6 |
Mar 23, 2012 Reply by Greg Jensen |
56" Wide Bottom troubles... A lesson is what NOT to do.Hello all - ran into some problems this weekend when trying to fit my bottom that I thought I would share. My build has a 56" bottom and I… Started by Greg Jensen in General Forum |
2 |
Mar 23, 2012 Reply by Greg Jensen |
UHMW Chine Caps?I'm replacing my chine caps. They we're pretty beat up after only one season. I used a soft wood instead of a hard wood (or maybe I need… Started by Ron Bakken in General Forum |
21 |
Mar 22, 2012 Reply by Jack Rose |
Interior Bottom PaintGreetings all, After finishing my boat with the au naturel look of clear epoxy and polyurethane on the interior, I have decided I now wan… Started by Dave Barnes in General Forum |
0 | Mar 22, 2012 |
Driftboat TrailerFinishing a 16 footer with 52" wide bottom. Thinking of buying a 5X8 Utility trailer (Northern Tool) and modifying. Anybody do this and if… Started by stephen ludwig in General Forum |
9 |
Mar 22, 2012 Reply by Dave Barnes |
Masking frames before installing dreaded 5200 and bottom?Well warm weather is back to New Hampshire and the garage is warm enough for epoxy and adhesives! I am curious if anybody ever masks the f… Started by Ray Cotnoir in General Forum |
7 |
Mar 22, 2012 Reply by Rick Newman |
plywoodJust wanted to get an opinion on using 7/16 plywood for the bottom? I found a local mill that has some 7/16 ab marine fir that they will s… Started by Thomas Hood in General Forum |
11 |
Mar 20, 2012 Reply by Rick Newman |
Stem DetailsI've searched the forums for info but just can't seem to find an answer. The plans I have don't give much detail for the stem (see attached… Started by Rick Wilson in General Forum |
8 |
Mar 19, 2012 Reply by Michael Rosso |
Epoxy and Glassing QuestionJust sealed the ribs and plywood with epoxy that will mate did this for waterproofing . My question is do I need to scuff the surface befor… Started by Loren Turnquist in General Forum |
4 |
Mar 18, 2012 Reply by Loren Turnquist |
© 2025 Created by Randy Dersham.
Powered by
