Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,011)
| Discussions | Replies | Latest Activity |
|---|---|---|
how big a batch for wet out?got the last screws thru the side of the boat today, ready to flip her and get to glassing. 18 oz bi-ax on the hull and 7 oz on the sides w… Started by chris towles in General Forum |
7 |
Jul 3, 2010 Reply by lhedrick |
Hell's Canyon of the Snake RiverAnyone have any information on this stretch of the Snake? I have spent quite a bit of time on the Snake through eastern Idaho but never on… Started by Chris Patterson in General Forum |
5 |
Jul 2, 2010 Reply by Rick Newman |
Gunwale woodBeen looking high and low for 18' lengths of white oak for gunwales. The only thing I could find was a Phillipine Mahogany in 18' lengths.… Started by jay eastwood in General Forum |
11 |
Jul 1, 2010 Reply by Todd Sherback |
what top coat is the best the epoxyI'm close to being done don't know the best top coat for a clear finish.Tim Started by Tim A. Meisch SR. in General Forum |
2 |
Jun 28, 2010 Reply by Randy Dersham |
How much rot is too much rot?I took the glass of the base of a 70's woody and am wondering when to pull the trigger on wood replacement surgery. Any advice wood be hel… Started by Timothy Wright in General Forum |
3 |
Jun 26, 2010 Reply by Rick Newman |
re: "Drift Boat Trailers" postI recently listed a post regarding drift boat trailers, inviting everyone to review my new web site, www.driftboattrailers.com. I am again… Started by Dennis Liden in General Forum |
2 |
Jun 25, 2010 Reply by Rob Glatthaar |
plywood skid shoe or 1/4" UHMWAny ideas on which to use I am new to driftboats so I will problably be a little rough on the boat. my main fishing area will be the olympi… Started by peter harris in General Forum |
1 |
Jun 24, 2010 Reply by Dennis Liden |
Needing South Holston InfoI have seen several posts by folks who fish in the Johnson City area and I would appreciate information about floating the South Holston an… Started by Les Kirk in General Forum |
3 |
Jun 20, 2010 Reply by Bryan Bowers |
Runaway Boat on the Deschutes...Hello Group...I went over to the Deschutes for the Salmon fly hatch last week and had quite an adventure in my drift boat made of wood. It… Started by Greg Hatten in General Forum |
8 |
Jun 16, 2010 Reply by Roger Fletcher |
Middle Fork questionsHello all, To all, but especially you North West boaters. This July I will be going on my first MF trip. We launch on July 6. First I ne… Started by lhedrick in General Forum |
6 |
Jun 14, 2010 Reply by Robb Grubb |
© 2024 Created by Randy Dersham.
Powered by
