Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,020)
| Discussions | Replies | Latest Activity |
|---|---|---|
Briggs Dory Building PhotosHere are some early photos from late fall... Started by Joe Dengler in General Forum |
0 | Jan 31, 2010 |
Anchor Pulley QuestionQuick question. Do any of you use the extra pulley at the anchor to reduce the amount of pull necessary to retrieve the anchor? Doesn't a p… Started by Jason Knight in General Forum |
7 |
Jan 30, 2010 Reply by Kenny Kent |
Need to put a new bottom on my BoatI'm new to the hobby of wooden boats. Over the summer I was able to pick up on older boat that needs alot of work. I got it for a good pr… Started by Wayne Guest in General Forum |
5 |
Jan 30, 2010 Reply by Charles Ray Heater |
Self bailing cockpit and passenger areaJust about to roll a Briggs dory upright and begin the decking. Would appreciate any insight on the self bailing cockpit (material/fitting… Started by Joe Dengler in General Forum |
3 |
Jan 29, 2010 Reply by Joe Dengler |
Briggs Dory without transom?1st time builder. I've spoken to some canyon guides who suggested omitting the transom and making the boat a double ender. Question: Using… Started by Joe Dengler in General Forum |
5 |
Jan 29, 2010 Reply by Joe Dengler |
New to the boat building world!Hello, I thought I would introduce myself. I am a senior this year and am building a 13 foot driftboat as my senior project. I have a blo… Started by Clint F in General Forum |
2 |
Jan 28, 2010 Reply by Jena Lemke |
New Poster for 2010 McKenzie River Wooden Boat FestivalStarted by Randy Dersham in General Forum |
6 |
Jan 28, 2010 Reply by Jena Lemke |
Drain PlugBeen itching to work on the boat - have some upgrade plans for a few areas that I will post about as I get underway. Last winter I was buil… Started by Jason Knight in General Forum |
8 |
Jan 26, 2010 Reply by Lawrence E. Long |
Oiling my boats interiorHey all, I am getting ready to re-oil my boat interior, in the past I used the Deks oil but have heard it is no longer available, is this t… Started by Dan Burr in General Forum |
5 |
Jan 23, 2010 Reply by Jesse Ronnow |
what grit sandpaper to sand old paint offi have been working on my boat and have been using a da and palm sander but was wondering what grit is most effectiveshould i start with 60… Started by tintnit in General Forum |
3 |
Jan 22, 2010 Reply by Jason Knight |
© 2025 Created by Randy Dersham.
Powered by
