Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,014)
| Discussions | Replies | Latest Activity |
|---|---|---|
Hello AllI just joined up. I reacently aqquired a Don Hill wooden drift boat, I am in the process of sanding and pulling the boats interior apart. T… Started by Steve Waak in General Forum |
8 |
Aug 19, 2009 Reply by Jason Knight |
Middle Fork of the SalmonThis may sound like a stupid question and it's not exactly about building a boat but I have no experience on this so I'm going to ask. It i… Started by lhedrick in General Forum |
14 |
Aug 17, 2009 Reply by Mike Dearing |
Questions about StainingI am in the middle of refinishing my boat, I have most of the initial sanding done. I was entertaining the idea of staining it before varni… Started by Ben in General Forum |
3 |
Aug 16, 2009 Reply by Ben |
Hydrotek?My local wood supplier is recomending Hydrotek as the best plywood for my project. He also carries and can get anything but swears by the H… Started by Chris King in General Forum |
6 |
Aug 14, 2009 Reply by Chris King |
Stitch & Glue vs. FramedHi everyone! Just signed in, great place! I´m looking forward to build my first boat this year, have been doing some research and was conv… Started by Felipe G. Ch. in General Forum |
29 |
Aug 13, 2009 Reply by Sandy Pittendrigh |
Does Ray's Dories Sell plansSo, I've been craving an offshore boat. Bad. Dreaming about it bad. Ultimately, I want to build a Bartender but in the meantime, i'd like t… Started by Karl Mueller in General Forum |
7 |
Aug 12, 2009 Reply by Dave Z |
New guy stumbling about the drift boat world.I'll admit that I've been stalking this site for some time. After reading about other's boats and projects, I think my time has come. There… Started by Josh Linstrom in General Forum |
2 |
Aug 7, 2009 Reply by Josh Linstrom |
Trailering and tie-down strapsGuys, I'm having a problem w/ tie-down straps (used when trailering the boat) rubbing the finish off of the gunwales of my 16' Tatman and w… Started by Craig Simon in General Forum |
13 |
Aug 4, 2009 Reply by Craig Simon |
Boats in the waterHave been building a 16 ft. double ender from a Roger Fletcher plan and finally put her in the water today. Have been reading various discu… Started by Richard in General Forum |
5 |
Aug 4, 2009 Reply by Richard |
Glass Bottom ?Good morning everyone, I ordered the glass, epoxy, graphit powder on monday from Raka (very nice guys with lots of info) so I plan on apply… Started by Eric Krause in General Forum |
3 |
Aug 3, 2009 Reply by Randy Dersham |
© 2025 Created by Randy Dersham.
Powered by
