Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,017)
| Discussions | Replies | Latest Activity |
|---|---|---|
Trailering and tie-down strapsGuys, I'm having a problem w/ tie-down straps (used when trailering the boat) rubbing the finish off of the gunwales of my 16' Tatman and w… Started by Craig Simon in General Forum |
13 |
Aug 4, 2009 Reply by Craig Simon |
Boats in the waterHave been building a 16 ft. double ender from a Roger Fletcher plan and finally put her in the water today. Have been reading various discu… Started by Richard in General Forum |
5 |
Aug 4, 2009 Reply by Richard |
Glass Bottom ?Good morning everyone, I ordered the glass, epoxy, graphit powder on monday from Raka (very nice guys with lots of info) so I plan on apply… Started by Eric Krause in General Forum |
3 |
Aug 3, 2009 Reply by Randy Dersham |
River MapsI recently finished a scratch built 16' double ender from Rodgers book. A friend is also building a boat. We are river novices and are tryi… Started by Brian Greenfield in General Forum |
2 |
Jul 30, 2009 Reply by mitchell |
COAT-IT?Has anyone used coat-it on thier boats? I am thinking about using it as my final layer on my boat bottom. What are the pros-cons of this st… Started by Joseph Podesta in General Forum |
6 |
Jul 29, 2009 Reply by Randy Dersham |
Graphite PowderHi everyone. I have been watching and learning from Chicago and appriciate all the information and pictures that everyone has taking the ti… Started by Eric Krause in General Forum |
7 |
Jul 27, 2009 Reply by Steve Sobba |
Sawyer wood and fiberglass oars questionHi, I bought a pair of sawyer 9' oars that need to have the handle replaced in one of them. Are there any instructions on how to do this pr… Started by Bryan McDade in General Forum |
2 |
Jul 24, 2009 Reply by Bryan McDade |
Drift boat plansOk I'm getting more serious about building my drifter. After researching I'm trying to decide between a kit or buying plans and building of… Started by Mark Heskett in General Forum |
25 |
Jul 24, 2009 Reply by Mark Heskett |
Maiden Voyage...Well it's official... the boat has made her maiden voyage! I am quite pleased to say she was everything I expected and more. Christine and… Started by Jason Knight in General Forum |
18 |
Jul 24, 2009 Reply by Rick Newman |
Eye boltGetting ready to install the eye bolt. From what I have read on this forum you put a hole all the way through the bow stem and then seal wi… Started by E. Landis in General Forum |
3 |
Jul 24, 2009 Reply by Jason Knight |
© 2025 Created by Randy Dersham.
Powered by
