E. Landis's Discussions (23)

Search Forum

View

Discussions Replied To (13) Replies Latest Activity

"Steve, That is exaclty what we did on boat #1. Turned out great. No leaks at all. I…"

E. Landis replied Oct 12, 2009 to Screw pattern- for epoxy bottom with rounded/taped edges

 4 Oct 14, 2009
Reply by Randy Dersham

"David, Thanks. Great set of plans. We ended up doing quite a few things different.…"

E. Landis replied Oct 1, 2009 to Finally finished the 18 ft Don Hill

 14 Oct 1, 2009
Reply by E. Landis

"Right now my boat building partner is part way through another 18ft build. I am help…"

E. Landis replied Sep 30, 2009 to Finally finished the 18 ft Don Hill

 14 Oct 1, 2009
Reply by E. Landis

"Ray and AJ, Just finished my first boat. Pictures will be up on the board soon. I u…"

E. Landis replied Sep 16, 2009 to How permanent is permanent?

 14 Sep 16, 2009
Reply by E. Landis

"I did the tatman style bottom and it worked out great. I had some questions and post…"

E. Landis replied Aug 7, 2009 to Don Hill project boat gone bad...help.

 19 Jan 25, 2023
Reply by Rick Newman

"I did the lighter tape for the wrapped portion. It worked out great. I think it was…"

E. Landis replied Aug 3, 2009 to Glass Bottom ?

 3 Aug 3, 2009
Reply by Randy Dersham

"I looked at that option. I only question if it will fit. I milled my bow stem cap so…"

E. Landis replied Jul 23, 2009 to Eye bolt

 3 Jul 24, 2009
Reply by Jason Knight

"I have been down the Middle Fork in a raft. We did the Middle Fork and Main all in o…"

E. Landis replied Jul 22, 2009 to Middle Fork of the Salmon

 14 Aug 17, 2009
Reply by Mike Dearing

"I am currently building the Don Hill 18 ft. fly fisher as well. As far as I can tell…"

E. Landis replied Jul 13, 2009 to Trailer Length?

 2 Jul 13, 2009
Reply by Steve Sobba

"You will want about 1,000 CFS on the rome guage. Higher is fine because the rapids a…"

E. Landis replied Mar 18, 2009 to Owyhee River Info Needed!

 8 Mar 20, 2009
Reply by Mike Dearing

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service