Replies to This Discussion

Permalink Reply by Rick Newman on July 7, 2015 at 11:45am

http://www.woodfinder.com/ seems to be a pretty good source for suppliers. Also http://wood-veneer.com/ in Gooding, ID.

Rick N

• ▶ Reply

Permalink Reply by Don Hanson on August 1, 2015 at 5:16pm

Crosscut hardwoods, Portland

• ▶ Reply

Permalink Reply by Kurt Selisch on August 1, 2015 at 6:23pm

Thanks Don, and Rick N for Crosscut and Bear Creek. Have called both to no avail. I am resigned to Homestead Lumber in Ohio. Actually the shipping costs from Ohio is not that much more than from what west coast suppliers would be.... so kind of pleasantly surprised.

• ▶ Reply

Permalink Reply by Gregg Maddock on July 7, 2015 at 8:18pm

Check out McBeth's. I was on their web site today and I thought I saw it available.

• ▶ Reply

Permalink Reply by Kurt Selisch on July 9, 2015 at 2:17pm

Thanks Rick and Gregg, much appreciated but no luck. McBeath's has Sapele with MDF core for cabinets but no marine ply. Rick thanks for wood river veneer info, I might give him a call to see if he can get marine ply. Gooding Idaho.....who'd a thunk

• ▶ Reply

Permalink Reply by David Witton on July 18, 2015 at 7:14am

Kurt

Apparently McBeath's web site is a poor match for their inventory - I tried to get some Hydrotek from them and was told that it would be a two month wait. I got some from Edensaw in Washington - have you tried them?

• ▶ Reply

Permalink Reply by Kurt Selisch on July 18, 2015 at 8:17am

Hi David, thanks for the info. Yeah I tried McBeath's last year for Hydrotek and got the same answer as you....none in stock. I looked on Edensaw's website and saw only MDF core Sapele for cabinets. But I plan to call them and hope they have marine grade. If not....my only choices so far are east coast suppliers, or Homestead which I think is in Ohio.

• ▶ Reply

Permalink Reply by Rick Newman on July 20, 2015 at 3:51pm

Kurt have you tried "Bear Creek Lumber" in Winthrop, WA?

Rick N

• ▶ Reply