Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,011)
| Discussions | Replies | Latest Activity |
|---|---|---|
my blogi put up a blog today, should have done it here. too cold to do much else. it was 30 degrees in the the califonria central valley this morn… Started by Joseph Podesta in General Forum |
0 | Nov 13, 2009 |
Inland Red Cedar?I am just starting a a project and came across some Inland Red Cedar and was wandering if it was ever used for ribs etc. Inland red, is sup… Started by Daniel Lucas Hoecker in General Forum |
1 |
Nov 12, 2009 Reply by Randy Dersham |
Steelhead FishingHey fellas, Looking at some pictures and thought I would post about our last weekend steelhead fishing. We went on a day trip to the Muskeg… Started by Jason Knight in General Forum |
1 |
Nov 12, 2009 Reply by Mike Dearing |
Worse Before Better (Bartender Restoration)As just any restoration project goes-though this is my first boat restoration, things get worse before they get better and you just have to… Started by Karl Mueller in General Forum |
3 |
Nov 12, 2009 Reply by Wil Bake |
GO DUCKS!GO DUCKS! Started by Mike Baker in General Forum |
9 |
Nov 10, 2009 Reply by Karl Mueller |
Missing page of Don Hill plansHello all, I am new to building boats and planning to build my first one. A friend gave me a set of plans for a Don Hill standard 16' drift… Started by Ray Hasiak in General Forum |
9 |
Oct 30, 2009 Reply by David Edwards |
Jonesin' for a new project.....Ok, so I have built three drift boats from scratch, 1 canoe and two sets of oars. I have four sheets of Meranti in the garage (6mm), 1-1/2… Started by Dave Z in General Forum |
3 |
Oct 29, 2009 Reply by Mike Baker |
New Classified SectionI have just added a new section for Classifieds. I have posted Alex's Willard Lucas boat as a test ad and to bring that offer to a section… Started by Randy Dersham in General Forum |
2 |
Oct 29, 2009 Reply by gary s brandon |
Pilot hole size for #14 ring nailNeeded a little input after reading the great recent discussion on nails vs screws. Going into white oak on the chine log eventually and cu… Started by Joe Dengler in General Forum |
2 |
Oct 29, 2009 Reply by Joe Dengler |
what kindof expoxy resin to use on my boat????im building a boat 7foot by 4foot(check out my blog) i live in england, scarborough, north yorkshire, i will be using it in the north sea b… Started by john meynell in General Forum |
1 |
Oct 27, 2009 Reply by Randy Dersham |
© 2024 Created by Randy Dersham.
Powered by
