Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,016)
| Discussions | Replies | Latest Activity |
|---|---|---|
Down sizingThis is a tough one for me, but it's time for me to downsize a bit. Go to www.riverstouch.com for details on these two boats - Started by Roger Fletcher in General Forum |
0 | Jul 2, 2018 |
Turning my Driftboat into a Whitewater DoryI have an older 16x48 Tatman driftboat that doesn't get as much use. I am considering converting into a whitewater dory. I am interested… Started by Roger Goth in General Forum |
4 |
Jun 20, 2018 Reply by Randy Dersham |
Best 18x54 kit?Selling my 16’ Don hill to a friend and looking to build an 18x54 from a kit. It will be a workhorse for heavy loads in rough water. Flyfis… Started by Wil Bake in General Forum |
5 |
Jun 14, 2018 Reply by Rick Newman |
12 x 48 build?So even though my own boat is still incomplete but very fishable, I've been dreaming of maybe building a play boat. I was thinking of some… Started by Bennett Yarbrough in General Forum |
9 |
Jun 10, 2018 Reply by Eric Loudenslager |
Plans for rope seat?I'd like to add a front seat option to my boat, similar to this one. I suppose I could mock up a few versions 'till I got it right, but I'd… Started by David Witton in General Forum |
1 |
Jun 5, 2018 Reply by Bennett Yarbrough |
Southeastern Rehab Opportunity (Asheville, NC)https://asheville.craigslist.org/boa/d/wooden-drift-boat/6596080083.html Looks like all it needs is a new inner gunwhale, chine caps, and… Started by Bennett Yarbrough in General Forum |
0 | Jun 4, 2018 |
Routing anchor lineI am working on prefinishing frames before assembling the hull of my boat. I plan to use a floor mounted anchor release and route the ancho… Started by JC Smith in General Forum |
4 |
Jun 2, 2018 Reply by Gregg Maddock |
Drift Boat MaterialsGreetings fellow boat builders, I am looking for some sources on materials for building a drift boat in the Atlanta, GA area. As I prepare… Started by Dino Gutierrez in General Forum |
5 |
May 29, 2018 Reply by Bennett Yarbrough |
Estimating resin qualtitiesHello back again. The boat I will assemble is a 17x52 but not in a high side configuration. After helping a friend with some glass/epoxy wo… Started by JC Smith in General Forum |
8 |
May 27, 2018 Reply by chris towles |
Strongback and instructionsHi guys, Do I need a strongback to assemble my drift boat? I have the ribs, transom and bow stem ready to go. Are stainless steel scr… Started by Andy Pruitt Heisler in General Forum |
3 |
May 21, 2018 Reply by Mike Baker |
© 2025 Created by Randy Dersham.
Powered by
