Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,017)
| Discussions | Replies | Latest Activity |
|---|---|---|
Wooden Boat Festival 2011 - ThanksIt was a great day to celebrate wooden boats on the McKenzie and once again, Randy and Debbie hosted a fantastic event. Blue sky, lots of… Started by Greg Hatten in General Forum |
27 |
Apr 28, 2011 Reply by Jayson Hayes |
Rear Knee BraceJust wondering if any one out there has an interesting solution for a rear knee brace, I don't like the arch gunnel to gunnel brace, I'm lo… Started by Dan Burr in General Forum |
26 |
Apr 27, 2011 Reply by Mike Collier |
Checking for leaksI am restoring an old mackenzie (1st attempt at wooden boat work) and was wondering about checking for leaks. Best I can figure is just tak… Started by Mike Crouch in General Forum |
2 |
Apr 27, 2011 Reply by justin nicola |
to abrade or to sand fully, that is the questioni now have a coat of epoxy on the entire hull, inside and out. getting ready to varnish. my question: can i abrade the epoxy or do i ne… Started by justin nicola in General Forum |
0 | Apr 27, 2011 |
Butt JointI know the common method of joining 2 sheets of plywood is the scarph joint but I am considering using a blocked butt joint. From what I… Started by Andrew in General Forum |
11 |
Apr 26, 2011 Reply by Andrew |
chine batten repairI discovered some rot in a white oak chine batten and the photos show the result. I have built a Ray's kit which had all the scarfing done… Started by Stephen Blalock in General Forum |
1 |
Apr 26, 2011 Reply by Jack Billings |
New to the gameHey all I just bought a beautiful wooden drift boat ( will post more pics soon ), but I have a few concerns on it. from front to back it… Started by Matt Lotridge in General Forum |
3 |
Apr 26, 2011 Reply by Dan Hooper |
Flow Coat QuestionHey guys, Quick question regarding a minor fix. I have my boat turned over right now to fix a damaged chine cap. The bottom fared very well… Started by Jason Knight in General Forum |
11 |
Apr 26, 2011 Reply by Robert Puckett |
Bo's under floor board anchor systemDoes anyone have photos and info on installing Bo's system. Placement/measurements of pullys on transom, height and size of holes in ribs?… Started by PATRICK M CLEAREY in General Forum |
11 |
Apr 23, 2011 Reply by Bill Kirkpatrick |
WBP on an iphonei use an iphone, and generally have difficulty navigating the site on it. it won't allow me to respond to messages or threads, and i can't… Started by chris towles in General Forum |
2 |
Apr 22, 2011 Reply by chris towles |
© 2025 Created by Randy Dersham.
Powered by
